Crushed stone calculator
Short answer
Crushed stone weighs about 1.35 tons per cubic yard. Covering 100 sq ft at 3 inches deep takes about 0.93 cubic yards (1.25 tons).
Weight per yard
1.35 tons
Best for
Driveway base, #57 stone
Crushed stone coverage per cubic yard
| Depth | 1 yd³ covers |
|---|---|
| 2" | 162 sq ft |
| 3" | 108 sq ft |
| 4" | 81 sq ft |
| 6" | 54 sq ft |
How much crushed stone do you need
Crushed stone weighs about 1.35 tons per cubic yard, and suppliers sell it by the ton or the yard. One cubic yard spread 3 inches deep covers roughly 108 square feet — go deeper and a yard covers less. To order, take your area, pick a depth, and convert to yards (area × depth ÷ 12 ÷ 27).
Crushed stone is typically used for driveway base, #57 stone. A decorative top layer needs only 2–3 inches, while a driveway or drainage base wants 4–6 inches of compacted material — so the same area can need twice the crushed stone depending on the job.
Bulk delivery by the ton or yard is far cheaper per unit than bagged crushed stone for anything bigger than a small top-up. The table below compares crushed stone against the other common aggregates by weight so you can gauge delivery tonnage.
What drives the amount
| Factor | Effect |
|---|---|
| Area | Length × width of the space you are covering |
| Depth | 2" tops up a bed; 3–4" for a path; 4–6"+ for a driveway or drainage base |
| Material density | Crushed stone runs ~1.35 tons/yd³ — how your yards convert to the tons suppliers bill |
| Compaction & moisture | Wet or compacted material weighs more; base layers settle, so order a little extra |
| Delivery vs bags | Bulk by the ton or yard is cheaper for big areas; bags suit small top-ups |
| Edging & waste | Uneven ground and edging losses add roughly 10% over the bare area |
Aggregate weight by material
| Material | Weight / yd³ | Best for |
|---|---|---|
| River rock | 1.45 tons | Decorative rock |
| Gravel | 1.42 tons | Pea gravel / general gravel |
| Crushed stone | 1.35 tons | Driveway base, #57 stone |
| Sand | 1.35 tons | Fill / paver sand |
| Topsoil | 1.1 tons | Screened, dry |
| Mulch | 0.4 tons | Wood / bark mulch |
Ordering tips
- Order crushed stone by the cubic yard for anything bigger than a few square feet — bags cost far more per yard.
- Measure the area and settle on a depth first; depth, not area, is what people under-order.
- Add about 10% for settling, compaction, and uneven ground so you are not left short.
- Enter your area and depth in the calculator for an exact crushed stone yardage, tonnage, and bag count.
Your project
Calculate crushed stoneOther materials
Frequently asked questions
How much does a yard of crushed stone weigh?
About 1.35 tons per cubic yard (2,700 lbs), give or take with moisture.
How much area does a yard of crushed stone cover?
One cubic yard covers about 108 sq ft at 3 inches deep, or half that at 6 inches. Enter your area and depth in the calculator for an exact figure.
How many yards of crushed stone do I need?
Multiply the area (sq ft) by the depth in feet, then divide by 27. The calculator does this and also gives the weight in tons, which is how bulk crushed stone is sold.