Cost to drywall 1,000 sq ft
Short answer
Drywalling 1,000 sq ft takes about 35 sheets of 4×8 and costs roughly $2,002–$4,278 installed — materials and labor at standard finish, about $2–$4 per square foot.
Installed cost
$2,002–$4,278
Per sq ft
$2–$4
Sheets (4×8)
35
Joint compound
4 boxes
Drywalling 1,000 square feet
Drywalling 1,000 sq ft takes about 35 sheets of 4×8 with a ~10% waste allowance for cuts around openings. Installed — sheets, compound, tape, screws, and labor at a standard finish — that runs roughly $2,002–$4,278, or $2–$4 per square foot.
Hanging the board is quick; taping, mudding, and sanding the joints is the slow, skilled part and the bulk of the labor cost. A higher level of finish (level 5 for glossy paint or raking light) adds coats and time, while high ceilings, closets, and lots of openings all add cutting and seams.
What drives your cost
| Factor | Effect on cost |
|---|---|
| Drywall area | ~1,000 sq ft of walls and ceiling to cover |
| Sheet size | Bigger sheets (4×10, 4×12) mean fewer seams to tape, but are heavier to handle |
| Waste factor | Plan ~10% extra for cuts around doors, windows, and outlets |
| Finishing materials | Joint compound, tape, and screws scale with area on top of the sheets |
| Taping & finishing | The biggest labor cost — 3 coats of mud with sanding between each |
| Level of finish | Level 3 for texture up to level 5 for smooth, glossy walls changes labor a lot |
Sheets & cost by sheet size
Sheets needed and installed cost to drywall 1,000 sq ft, by sheet size.
| Sheet size | Sheets | Installed total |
|---|---|---|
| 4' × 8' | 35 | $2,002–$4,278 |
| 4' × 10' | 28 | $2,002–$4,264 |
| 4' × 12' | 23 | $1,996–$4,269 |
Drywall finishing tips
- Bigger sheets cut your seam count — fewer joints to tape means a faster, flatter finish — but they're heavy, so have a helper or a lift.
- Budget time for three coats of joint compound with sanding between each; rushing the mud is the fastest way to a visibly bad wall.
- Buy about 10% extra sheets for cuts and the occasional broken corner — running one sheet short mid-job is a costly delay.
- Match the finish level to the lighting: level 4 is fine for most rooms, but go level 5 where glossy paint or side light will show every flaw.
Your exact room
Open the drywall calculatorOther areas
Frequently asked questions
How much does it cost to drywall 1,000 square feet?
Roughly $2,002–$4,278 installed for 1,000 sq ft at standard finish — materials and labor — about $2–$4 per square foot.
How many sheets of drywall for 1,000 square feet?
About 35 sheets of 4×8 (32 sq ft each) including 10% waste. That also needs about 4 boxes of joint compound, 1,250 ft of tape, and 1,000 screws.
How much is a sheet of drywall?
A standard 1/2-inch 4×8 sheet runs about $12–$18. Installed labor (hang + finish) adds roughly $1.50–$3.50 per square foot depending on finish level and whether it's walls or ceiling.