Standing-seam metal roof cost
Short answer
Standing-seam metal costs about $900–$1,600 per roofing square (100 sq ft) installed. A 2000 sq ft house with a 6/12 roof runs roughly $20,125–$35,777.
Cost / square
$900–$1,600
2000 sq ft house
$20,125–$35,777
Squares
24.6
Bundles
25
What drives standing-seam metal roof cost
Standing-seam metal roofing runs $900–$1,600 per roofing square (100 sq ft) installed. On a 2000 sq ft house with a standard 6/12 roof that works out to about $20,125–$35,777 — and it lasts roughly 40–70 yr, which is the number to weigh against the price when you compare it to other materials.
The biggest surprise on most roofing quotes is that your roof is bigger than your house. Pitch multiplies area: a steep roof has more surface than its footprint and is slower — and less safe — to walk, so labor climbs with steepness. Tear-off of old shingles (and disposal), the number of existing layers, and any deck repair found once the old roof is off all add to the standing-seam metal total.
Roof complexity is the other lever: valleys, dormers, skylights, chimneys, and multiple facets all mean more flashing, more cuts, and more waste. Regional labor rates and permit/inspection fees round it out. Ask for a quote itemized into tear-off, decking, underlayment, standing-seam metal, and flashing so you can compare bids like-for-like.
What affects your price
| Factor | Effect on cost |
|---|---|
| Roof size (squares) | Priced per 100 sq ft square at $900–$1,600/square |
| Pitch / steepness | Steeper roofs have more area and need safety measures — more material and labor |
| Tear-off & layers | Removing and disposing of old roofing (especially 2+ layers) adds cost |
| Roof complexity | Valleys, dormers, skylights, and chimneys add flashing, cuts, and waste |
| Deck repair | Rotted sheathing found during tear-off is replaced at extra cost |
| Region & permits | Local labor rates and permit/inspection fees change the total |
Standing-seam metal vs other roofing materials
Installed cost for a 2000 sq ft house with a 6/12 roof, plus typical lifespan.
| Material | Per square | House total | Lifespan |
|---|---|---|---|
| 3-tab asphalt shingle | $350–$550 | $7,826–$12,298 | 15–20 yr |
| Architectural shingle | $450–$750 | $10,062–$16,771 | 25–30 yr |
| Standing-seam metal | $900–$1,600 | $20,125–$35,777 | 40–70 yr |
Standing-seam metal roof planning tips
- Insist on concealed-fastener standing seam and proper expansion clips; exposed-fastener panels leak at the screws over time.
- Get itemized bids (tear-off, decking, underlayment, roofing, flashing) so you can compare like-for-like.
- Confirm the contractor is licensed and insured, and that a permit and final inspection are included.
- Re-roof in dry, mild weather — shingles seal best in moderate temperatures, and tear-off exposes your deck to rain.
Estimate your roof
Open the roofing calculatorOther materials
Frequently asked questions
How much does a standing-seam metal roof cost per square?
About $900–$1,600 per roofing square (100 sq ft) installed, including tear-off, underlayment, and labor on a typical roof.
How much to roof a 2000 sq ft house with standing-seam metal?
Roughly $20,125–$35,777 for a 6/12 roof (~24.6 squares). Steeper or more complex roofs cost more. Enter your size in the calculator.
How long does standing-seam metal last?
Standing-seam metal typically lasts 40–70 years — the longest of common roofing.